1/10 E revo 1717 motor mount version 2
This is a redesign of my first motor mount for the E revo/ Summit. It allow easier access to your gears. Some of the bigger gears you will need to cut down an allen wrench so that it will be small enough to get to your motor screws to allow you to set your gear mesh but you dont have to take it apart to switch out your pinion gears.This is a mounting plate that i made to install the Castle 1717 motor and esc from the XO-1 in my E Revo. I use it with Mod 1 gears 34/34 It works really well and come in 3 pieces with screws and aluminum standoffs to install it in your E Revo. It raises the motor up and clears the shock mount. Looks like it will work with the regular E Revo gears but I didnt try them out. works with castle 2200kv, 1717 and other motors with the same screw mount spacing. Its also a good mount to keep your motor from moving from big jumps. Cut from raw 6061 aluminum and not polished. Will be sand blasted to a matte finish. It will also fit the Traxxas Summit MOTOR MOUNT PARTS AND SCREWS ONLY. DOES NOT COME WITH A MOTOR OR THE TRUCK. This is not for the 1/16 scale trucks. will fit the 1/10 E revo and Summit.
Out of stock