- Spur adaptors and Spools
- 2 Cool Custom Rc Hobao GTBLE 8mm Spool FOR STOCK DOGBONES
2 Cool Custom Rc Hobao GTBLE 8mm Spool FOR STOCK DOGBONES
2 Cool custom rc Hobao GTBLE Spool FOR STOCK DOGBONES
This 35mm spool is for the Hobao GTBLE with stock dogbones. It consist of an 8mm Titanium spool shaft with high speed hybrid ceramic ball bearings Abec 7, comes with 17mm and a 19mm hardened steel drive cups. The 17mm cup goes toward the rear and the 19mm towards the front.
Before installing the spool for longevity make sure to add 3 to 4 drops of speed oil to the bearings. These bearings are high speed Hybrid ceramic bearings and they come dry from the factory. Make sure to use red loctite #262 or #271 on each set screw. Let it set for at least 24hrs for proper bonding. It can always be removed with a heat gun or a soldering iron
These parts are custom rc parts and due to the nature of the hobby and the stress and torture we put these parts through there is NO WARRANTY unless there is a manufacturing defect. There is NO WARRANTY For User error.
Make sure to clean each set screw and cups with Alcohol or Acetone to remove any oil residue before adding loctite to the parts