2 Cool Custom Rc 8mm Titanium spool Hobao VTE/VTE2/GTS/GTBLE OR Kyosho spool (35mm)
2 Cool Custom Rc 8mm Titanium spool for Hobao VTE/VTE2/GTS/GTBLE or Kyosho (35mm)
This 35mm spool is for the Hobao VTE/VTE2/GTSE/ Kyosho, To use with the gtble, Use the 17mm cup facing rear of the car or use both 19mm cups with op-0073 dogbones. It consist of an 8mm Titanium spool shaft with high speed hybrid ceramic ball bearings Abec 7 and 2 19mm hardened steel cups.
Before installing the spool for longevity make sure to add 3 to 4 drops of speed oil to the bearings. These bearings are high speed Hybrid ceramic bearings and they come dry from the factory. Make sure to use red loctite #262 or #271 on each set screw. Let it set for at least 24hrs for proper bonding. It can always be removed with a heat gun or a soldering iron
These parts are custom rc parts and due to the nature of the hobby and the stress and torture we put these parts through there is NO WARRANTY unless there is a manufacturing defect. There is NO WARRANTY For User error.
ATTENTION
Make sure to clean each set screw and cups with Alcohol or Acetone to remove any oil residue before adding loctite to the parts